Thelma Anderson

Author Archives: Thelma Anderson

DIY Wind Power – Start Work On Your Own Power Plant Today!

DIY Wind Power

DIY wind power is one of the easiest forms of renewable energy for you to develop and use, because the technology is quite straightforward and you don’t need to spend a lot of money to get set up and start reducing your dependence on grid power.

What You Need to Develop DIY Wind Power

Wind power has a few basic requirements that are usually quite easy to meet.  First, you need to live in a location where your energy source – the wind – is relatively constant and isn’t blocked too much by trees and large buildings.  Fortunately, most places meet these requirements, particularly if you can position your windmill blades at a reasonable height, say 30 feet or so.

The second requirement is that you can gain the permission of local authorities to build and run a diy wind power generator.  It is important to consider these issues and the possible reaction of your neighbors before you start construction, otherwise you could run into problems later on.  In crowded locations this could be difficult because a generator will produce some noise and there could be concerns about the visual effects of your turbine and its supporting structure.

However, if you do have sufficient wind energy in your area, as well as the space and permission to build, you will find that it is quite simple and inexpensive to construct a DIY wind power generator, especially if you can do most of the work yourself.

DIY Wind Power – Materials You Will Need

First and foremost, your windmill will need a strong structure and foundation to make sure it isn’t blown over.  DIY wind power generators are quite small, but you will want to make sure they can withstand the force of strong winds.  A well-built metal frame supported by a concrete foundation is one possibility.  Another one is to attach the turbine and blades to a pole on your roof so you can gain some extra height without having to build a tower in your backyard. In this instance you will need to make doubly sure the attachment points are very strong and that you will not affect the structural integrity of the building.  Do not attempt to cut corners in terms of material strength and quality, because you may well end up regretting it later on.

After you have built a strong base for your DIY wind power generator, you will need a set of blades to catch the wind.  You can make them yourself or buy them from a specialist supplier for a couple of hundred dollars.  These will in turn be attached to a motor that can convert the wind energy to electrical energy.  Some people recommend using old car alternators, but in fact these don’t work too well because they need to turn much faster than a properly built motor in order to produce electrical energy.

It is well worth the investment to purchase a specialist motor that can still produce energy at low wind speeds. They are not very expensive when you consider the extra power and durability you will get out of them. In fact, some of them will create power at wind speeds as low as 8 mph.

Make sure you install some sort of safety barrier between the turbine and the ground (or house roof) to deter inquisitive people from climbing up to the spinning blades and possibly getting injured.

As a final step in building your DIY wind power generator you will need some batteries to store the energy you have collected.  You will also need wiring between the turbine and the batteries, and between the batteries and your house. The batteries are needed because there will be times when there is no wind and in these cases you will need a ‘storehouse’ of power to draw from.

A DIY wind power generator is a great way to start using renewable energy and reduce your dependence on expensive grid power.  Building a generator can be a lot of fun and very rewarding if you start by doing some basic research on building codes and construction materials.  In a matter of weeks, you can be producing your own energy and be the envy of friends and family!

Build A Wind Turbine and Start Making Your Own Power

Build A Wind Turbine

Learning how to build a wind turbine is very straightforward and can be done quite cheaply. It is also an enjoyable alternative energy project that the whole family can get involved in.

Two of the most popular sources of renewable energy are solar and wind.  As standard energy prices continue to rise and the effects of using fossil fuels become more and more apparent, it is no surprise that many people are seeking information on how to build a wind turbine or construct a solar panel.

While both approaches are incredibly valuable for any person who wants to break the grip of the energy companies, the fact is that for the average person, wind power is much easier and less expensive to harness. If you have a steady source of wind in your neighborhood, sufficient space on your property, and the local building codes are favorable, then learning how to build a wind turbine is a great way to break into the world of renewable energy.

What You’ll Need to Build A Wind Turbine

The first thing you need to build a wind turbine is space. A turbine will not work effectively if the prevailing winds are blocked by trees and buildings.

The second thing you will need is local regulations and building codes that permit the construction of turbines. Turbines do produce some noise and for some people a windmill is an eyesore. It is a great idea to sound out your neighbors before you start to build, to make sure they are OK with the idea.  The last thing you want is a neighborhood dispute spoiling your project.

The third thing you need to build a wind turbine is, not surprisingly, a steady source of wind. A steady wind speed of 10-12 mph can provide most of the energy for a small home.  In many locations that is not a problem.  If you are unsure, check with your local meteorological station to see what records they keep.

If you have enough wind in your area, the next thing you need is the equipment and materials to build a wind turbine and store the energy you collect.  In essence, it is all very simple.  You need blades to catch the wind, a generator to convert the wind energy into electrical energy, copper wiring to transfer that energy, and batteries to store it for later use.   You can easily purchase all these materials online or at a hardware center, or you can source them yourself.

The blades need to be lightweight, concave and durable.  PVC pipe, plastic or recycled plastic bottles are some of the materials you can use. For most people, purchasing the generator is the best way to go. As far as batteries go, check with an electrical center to make sure you get batteries with sufficient storage capacity to match your energy requirements.

The final requirement is a structure to support your windmill, such as a small tower or pole. Strong recycled materials such as galvanized iron pipe are great. Don’t skimp on the strength of your supporting structure – for obvious reasons it has to be able to withstand any storms that come along.  For safety purposes, it is a good idea to position the structure so that no-one can climb it.

Learning how to build a wind turbine is a simple, yet immensely satisfying project. You can cut your energy bills and at the same time make a great contribution to protecting the environment…it doesn’t get much better than that!

Solar Energy DIY – The Fun Way To Save Money And The Environment

Solar Energy DIY

Solar energy DIY projects are an easy and fun way to get the whole family involved in environmental sustainability. The first thing many people think of when they hear the term ‘solar energy DIY’ is an array of high-tech solar panels on a roof or in a backyard.  While this is certainly one aspect of solar energy collection, the topic of solar energy DIY actually covers a range of energy collection methods, some of them much simpler and easier to undertake than building solar panels.

If you are interested in using solar energy as an alternative to the fossil fuel energy supplied by most power companies, then it is definitely worthwhile looking at all these options to see which of them, either by themselves or in combination, will suit your needs.

Greenhouses – A Simple Solar Energy DIY Project

An easy, yet highly effective way to harness solar energy is to build a greenhouse. This won’t actually cut your power bills but it will harness the sun’s energy so that you can grow your own fruit and vegetables, or simply provide you with a warm space you can relax in on a cold, clear winter’s day. You will also be able to save by cutting back on grocery bills, and you will have the satisfaction of growing plants the way you want, without any harmful chemicals.  There is also a lot of satisfaction to be had from developing a more independent lifestyle. There are a few ways you can build a solar energy diy greenhouse. One way is to build a permanent structure on your property using masonry, timber and glass.  However, there are much simpler and cheaper approaches. You can stretch heavy duty polythene over a frame, or use clear polycarbonate roof sheeting to collect the sun.

Hot Water Solar Energy DIY

Another way to collect renewable solar energy and cut down on your power bills is to build a solar hot water heater. Even in winter there is plenty of energy in the sun’s rays, more than enough for many people’s needs.  With a solar energy DIY project, you can easily heat your home, provide hot water for washing, or both.  And during periods when there is no sun you can switch back to your standard supply. A hot water solar DIY energy project is relatively cheap and simple to undertake, and the materials you need are readily available from hardware stores and online sources.

Using Solar Energy DIY to Create Electricity for Your Home

A third solar energy DIY project you can do is to build solar panels that convert the sun’s energy into electrical energy. This is not a particularly easy or cheap option if you want to replace all your power needs, but you can certainly get underway with a simple project that will still have a significant impact on your power bills. One cheap approach is to buy slightly damaged/old solar panels at a reduced price and wire these into your home’s electrical system.  They won’t be as efficient as new ones but it can be a good way to get started if you are on a tight budget. Alternatively, you can buy new solar energy diy kits for a reasonable price that will enable you to run at least some of your appliances using the sun’s energy.

Combination Solar Energy DIY Projects

If you are keen on making the transition through to a fully solar-powered home, it is worthwhile undertaking a combination of all the solar energy DIY approaches described above.  Of course there is no need to do them all at once.  Start small and simple, slowly building your overall system with a number of easy, manageable projects.  This is the best way to build your confidence and knowledge without becoming stressed out. A solar energy DIY project can be more expensive and complex than using other sources such as wind power, but it is still a highly worthwhile undertaking and is well within the capabilities of most people.

How to Make A Solar Panel Cheaply And Easily

Solar Panel

You can easily adapt modern solar panel technology and learn how to make a solar panel to create power for your home. Solar panels have been around in the energy and space industries for many years, and the technology is very reliable and efficient.

The process of how to make a solar panel can be undertaken using the sorts of tools and materials that are found in many garages, and those that you don’t have can be easily found in places such as recycling facilities, hardware stores, on eBay or from other online suppliers. And best of all you don’t need a technical degree or a high level of skill; just the willingness to make your own alternative energy, a bit of spare cash and a few hours spread over a couple of weekends.

How to Make a Solar Panel – The Basic Materials You Will Need

* Wiring

* Wiring solder

* Glue

* A waterproof sealing agent such as silicone

* Plastic panel

* Wooden framing material & screws

* Black paint

* Solar cells

In terms of solar cells, make sure you go for quality instead of lowest price. Remember that you will want a high-efficiency system that will last a long time. When planning how to make a solar panel, you will need to calculate how much power you want to produce, and then divide this by the output of an individual cell to give you the number of cells required. Bear in mind that even well-constructed DIY systems will probably only produce around 80% of the claimed output per cell.

How to Make a Solar Panel – Putting It All Together

Once you have collected all your materials, the construction part of how to make a solar panel is quite straightforward.

Glue your solar cells together in square ‘blocks’ of 36 (i.e. 6 by 6), using the joining tabs to make sure that the electricity will only flow in one direction. Put the cells on a backing board and then fix them inside an insulated wooden frame. Paint the wooden frame black and cover the frame and cells with your plastic paneling. Screw the paneling onto the frame and make sure it is properly sealed with the silicone. Your solar panel will then be ready to place on the roof or wherever else is suitable.

Connecting and Installing Your Solar Panel

The next stage in how to make a solar panel is to connect it to a series of storage batteries, so that you can ‘draw’ on the power when you need it. It is a good idea to talk to an electrician or battery supplier to make sure you get the right batteries and wiring setup for your needs. Either way, you should be able to complete this stage in a weekend without any difficulties.

Finally, place your framed cells on a roof or other suitable location that isn’t shaded by nearby buildings or trees, and align them in such a way that they will collect the maximum amount of sunlight for your location.

With some planning and simple materials, the process of how to make a solar panel is quite easy, and best of all, enjoyable. In these times of excessive reliance on fossil fuels, it is a great DIY project that can produce serious financial and environmental benefits for your family and community.

DIY Magnetic Energy – A Great Way to Power Your Home

DIY Magnetic Energy

DIY magnetic energy is a great way to produce alternative energy for home use.  Of course there are plenty of ways to produce alternative energy these days, including solar panel systems and wind turbines.  However, converting your house to wind or solar is a fairly substantial task, so it is worthwhile considering other options such as DIY magnetic energy if you are looking to reduce your dependence on the grid or simply save yourself some money.

What Is DIY Magnetic Energy?

Magnets are very common, but they are mostly out of sight and as a consequence we don’t give them much thought. In fact, the properties of magnets are essential to many pieces of equipment we use every day.   ‘Standard’ electricity is made when a rotating device called a turbine moves a magnet around a wire.  This causes a current to flow in the wire, and we use that current to power the appliances in our homes.  The rotation can be produced by wind, water or some other force.  In comparison, DIY magnetic energy, sometimes called ‘free energy’, uses a self-running magnetic motor hooked up to another set of magnets/wire coils that produce the electricity.  You only need a small charge to get the motor started and you are on your way to producing power from your DIY magnetic generator.

Where to Get a Motor for Your DIY Magnetic Energy Generator

One of the easiest ways to make a magnetic motor for your generator is to build it yourself.  There are some good online information sources that give detailed instructions on how to build your DIY magnetic energy generator.  If you plan and do your research properly, you will find it quite a straightforward process and you should be able to construct the generator yourself using readily available equipment. It is a good idea to supplement any power you produce with another source such as the power grid or other forms of alternative energy.  Relying on any one power source is unwise because it leaves you vulnerable to breakdowns or other supply problems. One advantage of a large DIY magnetic energy generator, or any type of alternative energy source for that matter, is that it makes it possible to feed power back into the grid if you have any surplus, and get paid for your trouble!

Energy Conservation & DIY Magnetic Energy

Once you have set up your generator and it is producing power, it is still a good idea to introduce energy conservation measures into your home so that your domestic costs are kept as low as possible.  Simple measures like turning off appliances when they’re not in use, switching off lights, using energy efficient bulbs and switching your refrigerator and freezer to their optimum settings will all help.

1 14 15 16 17 18 20